The Onkyo TX-NR929 is a state of the art AV receiver from the Onkyo corporation. It's built to impress and will turn a 'big room into a small one' by virtue of its output. It provides an 11 speaker jack configuration for a 9.2 channel output. It can be connected in a 3-zone installation, in which Zone 1 enjoys a 5.1 channel movie, Zone 2, a movie with stereo audio and Zone 3 stereo audio. It provides Infrared, Bluetooth, LAN/WLAN and RS-232 for interconnection with compatible devices for automation.
Amplifier Section
- All Channels: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
- Front L/R: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
- Center: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
- Surround L/R: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
- Surround Back L/R: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
- Dynamic Power: 300 W (3 Ohms, Front), 250 W (4 ohms, 1 Front), 150 W (8 ohms, Front)
- THD+N (Total Harmonic Distortion + Noise): 0.08%THD (20 Hz-20 kHz, Rated Power)
- Damping Factor: 60 (Front, 1 kHz, 8 Ohms)
- Input Sensitivity and Impedance: 200 mV/470 Ohms (Line), 2.5 mV/47 k-ohms (Phono MM)
- Rated RCA Output Level and Impedance: 200 mV/470 Ohms (Line Out)
- Maximum RCA Output Level and Impedance: 4.6 V/470 Ohms (Line Out)
- Phono Overload: 70 mV (MM, 1 kHz, 0.5%THD):Frequency Response 5 Hz-100 kHz/+1 dB, -3 dB (Direct Mode)
- Tone Control: ±10 dB, 30 Hz (Bass), ±10 dB, 20 kHz (Treble)
- Signal-to-Noise Ratio: 110 dB (Line, IHF-A), 80 dB (Phono MM, IHF-A)
- Speaker Impedance: 4 Ohms–16 Ohms or 6 Ohms-16 Ohms
- 9.2 Channels (11 speakers)
- Power Watts/Channel: 135W (8ohms 20-20kHz, 0.08% THD, 2 Channels Driven)
- THX Certified: Select2 Plus
- Continuous 6-ohms Rated and Certified 4ohms performance
- All Discrete Circuitry
- 3-Stage Inverted Darlington Circuitry: (All Channels)
- PUSH-PULL Design
- Independent Power Supply
- Bi-amp Capability For Front
Video and Audio Processing
- DTS Neo:X
- DTS Decoder: DTS-HD Master Audio
- DOLBY Decoder: True HD, DolbyDigital Plus, Dolby PLIIz
- ONKYO GAME Surround Modes
- THX Processing Mode
- Audyssey DSX
- Audyssey Dynamic EQ
- Audyssey Dynamic Volume
- Music Optimizer: (Advanced)
- 192K/24 Bit DACs: (Burr-Brown)
- isf Certified Calibration Control
Connectivity
- 3/0 in/out Audio
- 1/0 in/out Phono
- 3/0 in/out Optical Digital
- 3/0 in/out Coaxial
- 5/1 in/out A/V
- 0/1 Video
- 2/1 in/out Composite AV connection
- 1/0 in/out USB
- 9/2 in/out HDMI I/O
- VGA - PC Input (15 pin D-sub)
- 0/9 channel pre-outs
Features
- HDMI Support for 3D, Audio Return Channel and CE
- HDMI Support for Deep Color, x.v.Color, LipSync
- HDMI Support for DVD-Audio, SACD, Multichannel PCM
- Analog To HDMI Upconversion: (from 480/576i)
- 1080p Upscaling: (Marvell Qdeo)
- 4K (up to 4096 x 2160) Upscaling: (Marvell Qdeo)
- 4K Passthrough
- Powered Zone2 and Zone3
- Zone 2 Line Out and Zone 2 Video Out
- HDMI Zone 3 Line Out
- iPod Ready: (via optional DS-A5)
- Airplay Ready: (via optional DS-A5)
- Supports Onkyo Remote App: (iPod touch/iPhone and Android-Powered Devices)
- Internet Radio Capable: (Pandora, Spotify, Rhapsody, Sirius/XM, Slacker, last.fm, Aupeo!, TuneIn)
- Streaming Audio From PC / Network: (DLNA, Home Media)
- Streaming Audio Formats Supported: (MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, AAC Stereo, Apple Lossless, DSD, LPCM, Dolby TrueHD
- Wireless Network: (Wi-Fi-Certified)
- Bluetooth: (Built-in)
- IRS-232
- IR Input
- Ethernet
- ONKYO-RI System Control
- 12V Trigger: (Zone 2/3)
Video Input Sensitivity/Output Level and Impedance
- 1 Vp-p/75 Ohms (Component)
- 0.7 Vp-p/75 Ohms (Component PB/CB, PR/CR)
- 1 Vp-p/75 Ohms (Composite)
- Component Video Frequency Response: 5 Hz–100 MHz, -3dB
Tuning Frequency Range
- FM: 87.5 MHz–107.9 MHz
- AM: 530 kHz–1,710 kHz
- FM/AM Preset Memory: 40 stations
Power Supply
- AC input: 120 V, 60 Hz
- Power Consumption: 9.1 A
- No-Sound Power Consumption: 120 W
- Standby Power Consumption: 0.1 W
Dimensions and Weight
- 17 1/8" x 7 13/16" x 17 1/4" (435 x 198.5 x 437.5 mm)
- 40.8 lbs (18.5 kg)
Miscellaneous
- Learning Remote
- On Screen Remote Programming
- Activity Based Remote
- Color-Coded Speaker Terminals
- Auto Speaker Calibration W/Mic.: (Audyssey MultEQ XT32)
- OSD Out: (Advanced "Home" GUI)
- Solid Aluminum Front
No comments:
Post a Comment